How To Fix Broken Blinds String

Step 10 With the ladder string still lined up cut the bottom end of the ladder string eight inches longer than the old ladder strings. Take hold of the broken end of the cord that travels up into the headrail.

Pin On We Own A Home

Whatever the case may be you dont always have to replace the entire window covering just because your cord is broken.

How To Fix Broken Blinds String. Make sure you have enough to tie a large knot at the end and then cut the tail sealing the ends. Next you need to thread the rest of the blind string through the headrail so it can become the pull cord. More than likely your string snapped at the top where the plastic broke.

Put the end caps back and hand the blind back into the brackets. How to Fix Blinds String 7 Quick and Easy Steps Step 1. Your blind is up and running again.

Slide the top and bottom rails back into their previous positions. Run the string through the cord lock mechanism. First use a ruler to determine the diameter of the string.

Pull on the tassel or lift cord and it should string right through the blind. Pull the shade open. Dont start pulling the broken cord or tassels yet.

Thread them back through the holes in the top of your blind. Determine the diameter and the length of the string. Now take the screws off and slowly slide the top rail off.

Please help support my channel by using my link to. Take a flathead screwdriver to remove the end caps off from the top rail of the shade. Be careful not to pull the blind string out of the blinds as you do this step.

Replace the plastic cap you removed earlier and give the new blind string a tug to make sure it will stay put. As an amazon affiliate i get commissions from purchases made from links in the description of my videos. The cord lock should be placed back into the top rail.

Clip any excess fray from the end of the cord. Take the two ends make sure they are around the blind correctly and lined up straight again. You can cut off the excess string later.

Tie a new knot in the cord at the bottom rail and replace the rail cap. With the replacement cord in hand take one end and attach it to the broken end of the cord. Step 12 Rehang the blind.

Find out the problem of the blind string. Step 11 Feed the new ladder string up through the head rail and attach them to the drums. The locking mechanism should keep the cord from slipping back.

First take a careful lookout at your blind shade. How do you do that you ask. Take needle nose pliers and push the cord lock clips in from the side.

Replace a Pull Cord Step 1. Use your pliers to tightly secure the ladder clasp to the string. There are two different ways to do this.

You dont want to undo all the work you just did. Tie a regular square knot in the tail close to the end and stuff it and the excess ladder. Put the washers back in position and tie a knot at the end of the string.

Pin On Home Ideas